* the world most used flotation deinking

* the basic process is a pulp, screening and flotation, heat dispersion bleaching

* use different deinking process and different deinking agent can get different quality of regenerated fibers

* but office waste paper containing heat UV curing ink cannot be completely removed using flotation method

* more difficult is of using aniline ink, water-based ink printing paper

2. About the aniline ink, water-based ink)

Aniline * water-based ink, usually with acrylic acid/acrylate copolymers as binder, since no organic solvent when aniline water-based ink printing, less pollution to the environment, security, and print washing is convenient, widely used in the printing industry in recent years. But this kind of ink in the conventional flotation method can't eliminate, the main reason is: after hydrapulper the ink particles become very small (0.3 ~ 2 microns); That is water-based ink, hydrophilic, is because the ink particles is small and is hydrophilic, and therefore won't be collected by the commonly used method and agglomeration, thus continue to suspended in the water, the existence of this kind of ink particles of the waste paper pulp whiteness reduced by 6% ~ 10%.

3. PA300 application mechanism and method of use

* PA300 for industrial water hardness is not sensitive, so there is no need to supplement calcium, also won't produce calcium precipitation and scale, the danger of fiber loss is low.

* PA300 no special requirements for deinking temperature, normal temperature, in saving energy and fiber strength are protected.

* PA300 surfactant in its strong emulsification, dispersion and flocculation etc can effectively eliminate the resin precipitation, to obtain high quality recycled fibers.

* PA300 contains cationic surfactant is a kind of anticorrosive fungicide, the pulp has very good bactericidal effect.

* ink, water-based ink removal of aniline with special performance.

* promote effectively in the process of flotation foam, beneficial to the improvement of the whiteness

* this product is suitable for the ONP MOW the OMG deinking process

Safe and convenient use

* method of use This product is a liquid, diluted pulper entry or directly to join at the flotation cell.

By our engineer on site for the amount of * (process design and the different types of production equipment, waste composition, etc.), reference dosage is 0.4% _0. 5% (relative) tons of waste paper

4. PA300 technical indicators

* look pale yellow oily liquid

* PH 3-6

* flash point 165 ℃ (KaiKouBei)

* relative density 1-1.1 G/CM3

5. Packing and shipping store

* PA300 200 kg

* indoor storage to avoid direct sunlight

* in ordinary chemical transportation way

* warranty for two years